JuJu Performance Clear is a Xylene based clear coat resin designed to match the slip co-efficient required for dance floors within the European Standard EN14904 friction range of 80-110 in which friction must be high enough to prevent early and uncontrollable sliding of performers on the surface, but also low enough to allow slipping at extremely high forces generated by the players during sports activities.
I want a coloured finish to my floor, what type of paint can I safely use with Juju?
Why do you recommend water borne primer?
Non-toxic ✔ Wear resistant ✔ Easy Application Won’t react adversely with the Juju ✔ Water clean ✔ Fast drying✔
Why can’t I use a 2 – pack sealer?
×It will resist other chemically based products i.e. other paints, in this instance Juju. Put simply, all paints chemically attach themselves to what is underneath them. In this instance the solvent Xylene eats into the material below creating the bond.
This is assisted by scoring the surface to create a “tooth” or access path.
× 2 pack materials “resist” abrasion and form an impervious sealed layer that unfortunately is also “thermo-elastic”
This means that they heat up when abraded causing clogging up any sandpaper or sanding screens.
× This in turn means it will be very hard to remove; we have on occasion had to use concrete grinding equipment to make good a badly prepared floor.
STM Studio Supplies researches and updates the product list by listening to customers and practical installation by ourselves.
To enable constant improvement all and any feedback is most appreciated.